Kuryakyn 1337 BAHN WINDSHIELD TRIM for FLHT/FLHX/TRIKE User Manual download pdf (Page 2)

PAGE

STEP 3

Carefully position the Trim against the outer fairing; align the holes.

STEP 4 Refer to PIC 2. Starting in center, secure the Trim to the fairing with the included screws; leave

all three loose until they have been started in their threads; tighten the screws.

BAHN WINDSHIELD TRIM for FLHT/FLHX/TRIKE

INSTALLATION

Ride On!

TIPS FOR PROPER CARE:

Your new BAHN product is made out of anodized aluminum. Anodized aluminum requires special at-

tention when cleaning. Some cleaning products or procedures can actually remove the anodized

treatment which will lead to pitting in the aluminum.

Thoroughly clean the BAHN product often with a soft cloth, mild soap and water. Regular cleaning

keeps contaminates from building up.

Rinse thoroughly with FRESH water.

Use only metal protection products that are formulated for anodized aluminum.

DO NOT USE bleach or chlorides to clean the BAHN product.

DO NOT USE products containing abrasives to clean the BAHN product. Never use steel or brass

wool, wire brushes, polishing wheels, rubbing or polishing compounds on the BAHN product.

DO NOT USE concentrated alkaline based solutions to clean the BAHN product. Many detergents are

alkaline based.

It is the end user’s responsibility to ensure that all of the fasteners

(including pre-assembled) are tightened before operation of the motorcy-

cle. Küryakyn will not provide warranty coverage on products or compo-

nents lost or damaged due to improper installation or lack of maintenance.

Periodic inspection and maintenance are required on all fasteners.

PIC 2

STARTING IN THE CENTER, ATTACH THE TRIM WITH THE INCLUDED SCREWS

1 2

No comments

Kuryakyn 1337 BAHN WINDSHIELD TRIM for FLHT/FLHX/TRIKE User Manual Page 2