Kuryakyn 7636 BAHN VALVE COVER ACCENTS FOR VICTORY — TUXEDO User Manual download pdf (Page 2)

PAGE

STEP 2

Refer to PIC 1. Using warm soapy water and a clean rag, remove all dirt and debris from the

valve covers; allow the areas to dry completely. Wipe the valve covers with the included alcohol

pads to remove any wax or polish; allow the areas to dry completely.

STEP 3 Position the BAHN Valve Cover Accent for Victory as shown in PIC 1. Rest the Accent on a piece of

cardboard (e. g. the backing card from the packaging) to space it up from contact with the top

cylinder fin. Use masking tape to make alignment marks; remove the Accent.

STEP 4 Use your fingernail to rub the adhesive backing on the Accent; this will activate the adhesive. Re-

move and discard the backing.

STEP 5 Using the marks made in STEP 3, align the Accent and press it into place for one minute (apply

pressure to the top half of the Accent only); full bonding will occur after 24 hours. Remove the

cardboard and discard the masking tape.

STEP 6 Repeat STEPS 3 through 5 for the other Accent.

BAHN VALVE COVER ACCENTS FOR VICTORY — TUXEDO

INSTALLATION

TIPS FOR PROPER CARE:

Your new BAHN product is made out of anodized aluminum. Anodized aluminum requires special at-

tention when cleaning. Some cleaning products or procedures can actually remove the anodized

treatment which will lead to pitting in the aluminum.

Thoroughly clean the BAHN product often with a soft cloth, mild soap and water. Regular cleaning

keeps contaminates from building up.

Rinse thoroughly with FRESH water.

Use only metal protection products that are formulated for anodized aluminum.

DO NOT USE bleach or chlorides to clean the BAHN product.

DO NOT USE products containing abrasives to clean the BAHN product. Never use steel or brass

wool, wire brushes, polishing wheels, rubbing or polishing compounds on the Bahn product.

DO NOT USE concentrated alkaline based solutions to clean the BAHN product. Many detergents are

alkaline based.

Ride On!

PIC 1

VIEWED FROM BRAKE-SIDE (RIGHT)

CLEAN THE VALVE COVERS

REST THE ACCENT ON A PIECE OF

CARDBOARD TO SPACE IT UP FROM

CONTACT WITH THE TOP CYLINDER

FIN

1 2

No comments

Kuryakyn 7636 BAHN VALVE COVER ACCENTS FOR VICTORY — TUXEDO User Manual Page 2